SWX2322P Firmware V2.06.17
Main Revisions and Enhancements
Feature Additions
- Support for ProAV Quick Setup
- Added and updated the following commands: ip igmp snooping fast-leave auto-assignment ip igmp snooping check ra enable/disable ip igmp snooping check tos enable/disable ip igmp snooping report-forward enable/disable ipv6 mld snooping report-suppression show ip igmp snooping interface show ipv6 mld snooping interface proav profile-type
Specification Changes
- Default Configuration Updates
- Added the following settings: ip igmp snooping disable ipv6 mld snooping disable
- Web GUI ProAV Menu Enhancements
- Added a new ProAV profile screen.
- Added a new multicast screen.
- Updated the Web GUI's Dante optimization settings:
- Reviewed commands applied during manual configuration.
- When flow control is enabled, commands now disable this feature.
- When LLDP is disabled, commands will now allow it.
- Updated the Web GUI dashboard:
- Added a bandwidth usage button to the interface gadget to display per-port usage.
- Added new settings in Web GUI:
- [Multicast] - [IGMP Snooping]
- RA Check
- ToS Check
- Report Forwarding Feature
- Automatic Fast Leave Assignment
- [Multicast] - [MLD Snooping]
- Report Suppression Feature
- [Multicast] - [IGMP Snooping]
- Port Initial Layout Update
- Changed the default port layout from Vertical to Horizontal.
- Set the upper row as Dante Primary and the lower row as Secondary in a Horizontal layout.
- Displays an error if the VLAN ID limit is exceeded:
- "Profile cannot be set as the VLAN ID limit has been reached."
- Command Updates
- Updated LAN/SFP port configurations:
- Added, tlv-select basic-mgmt(LLDP).
- Removed, spanning-tree enable/disable.
- Removed the no spanning-tree command from the ProAV profile reset configurations.
- Updated LAN/SFP port configurations:
- Initialization Specification Changes
- Changed the "Reset to Default Settings" button in the Web GUI ProAV profile screen to restore factory settings.
- Made the following adjustments:
- System Initialization:
- Replaced, "no lldp run" with "lldp run".
- Added, "lldp auto-setting enable".
- VLAN Interface Initialization:
- Added, "l2-mcast flood 239.192.128.250".
- Added, "ip igmp snooping disable" and "ipv6 mld snooping disable".
- LAN/SFP Port Initialization:
- Replaced, "no lldp-agent" with "lldp-agent".
- Added, "no tlv-select basic-mgmt".
- System Initialization:
- Multicast Default Reset Update
- Changed the "Reset to Default Settings" action for VLAN interfaces to restore factory settings.
Bug Fixes
- IGMP/MLD Snooping Setting Fix
- Solved an issue where the following commands, when executed in "no" format, did not reflect changes: ip igmp snooping version ipv6 mld snooping version
- Dante Optimization Display Fix
- Solved an issue where Dante optimization status was not displayed correctly in the RM-CR GUI.
- VLAN-ID Error Fix
- Solved an error in the ProAV multicast settings screen when selecting profiles with VLAN IDs of 257 or higher.
- Toggle Button Height Alignment
- Unified toggle button heights in the following ProAV settings screens:
- Dante Primary/Secondary Connection Settings
- CUSTOM Settings
- Unified toggle button heights in the following ProAV settings screens:
- SDVoE Item Visibility Fix
- Solved an issue where SDVoE items were not displayed on multi-speed devices in stack configurations.
- Menu Display Issue Fix
- Solved an issue where menu items were not visible when the Web GUI language was set to English, and the browser window was resized.
- Error Message Update
- Updated error messages in the Web GUI [ProAV Settings] - [Profile] when LAG member ports exist:
- "Remove the ports that belong to a logical interface from the logical interface."
- Updated error messages in the Web GUI [ProAV Settings] - [Profile] when LAG member ports exist:
- Unused Legend Display Fix
- Solved an issue where unused legends were displayed in the Web GUI ProAV profile.
Concorde com os termos para baixar o arquivo
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT.
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY ABORT USING THE SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Subject to the terms and conditions of this Agreement, Yamaha hereby grants you a non-transferable license to use copy(ies) of the software program(s) and data ("SOFTWARE") accompanying this Agreement, only on a computer, smartphone, musical instrument or equipment item that you yourself own or manage. The term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or Yamaha's licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the storage media in which the SOFTWARE is stored and the data created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
2. RESTRICTIONS
- You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever.
- You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE.
- You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.
- You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
- You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
- You may not use the SOFTWARE in any manner that might infringe third party copyrighted material or material that is subject to other third party proprietary rights, unless you have permission from the rightful owner of the material or you are otherwise legally entitled to use.
- You may not engage in any act that are against the law, public order and morals.
Copyrighted data, including but not limited to MIDI data for songs, used by or obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe.
- Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
- Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner.
- The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner.
3. TERM
This Agreement becomes effective on the day that you agree with this Agreement and remains effective until terminated. If any copyright law or provision of this Agreement is violated, this Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately abort using the SOFTWARE and destroy any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE SOFTWARE IS AT YOUR SOLE RISK. THE SOFTWARE AND RELATED DOCUMENTATION ARE PROVIDED "AS IS" AND WITHOUT WARRANTY OF ANY KIND. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.
5. LIMITATION OF LIABILITY
EXCEPT WHEN THE DAMAGE INCURRED DUE TO ANY CAUSE ATTRIBUTABLE TO YAMAHA, YAMAHA'S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. EXCEPT WHEN THE DAMAGE INCURRED DUE TO ANY CAUSE ATTRIBUTABLE TO YAMAHA, IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EVEN IF YAMAHA IS LIABLE, EXCEPT IN CASE OF WILLFUL MISCONDUCT OR GROSS NEGLIGENCE BY YAMAHA, YAMAHA'S TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES AND CAUSES OF ACTION (WHETHER IN CONTRACT, TORT OR OTHERWISE) SHALL BE LIMITED TO DIRECT OR GENERAL DAMAGES AND SHALL NOT INCLUDE INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES, AND IN NO EVENT SHALL YAMAHA'S TOTAL LIABILITY TO YOU FOR ALL DAMAGES EXCEED THE AMOUNT PAID FOR THE PRODUCT USED WITH THE SOFTWARE.
6. OPEN SOURCE SOFTWARE
This SOFTWARE may include the software or its modifications which include any open source licenses, including but not limited to GNU General Public License or Lesser General Public License ("OPEN SOURCE SOFTWARE"). Your use of OPEN SOURCE SOFTWARE is subject to the license terms specified by each rights holder. If there is a conflict between the terms and conditions of this Agreement and each open source license, the open source license terms will prevail only where there is a conflict.
7. THIRD PARTY SOFTWARE AND SERVICE
Third party software, service and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. IF, in the written materials or the electronic data accompanying the software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the terms of any agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof.
- Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
- Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.
U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The Software is a “commercial item,” as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein.
8. CHANGE OR END OF SOFTWARE
- Yamaha may change the specification of the Software without notice to you.
- Yamaha may end the supply or support of the Software without notice to you when Yamaha determines that it is difficult to continue supply of the Software accompanied by the end of manufacturing or sales of the products or service applicable to Software.
9. AMENDMENT
- Yamaha may at its discretion amend, revise, or update this Agreement.
- When Yamaha amends, revises, or updates this Agreement, Yamaha obtains your consent to the updated terms of this Agreement, or Yamaha specifies the amendment contents and the effective date and posts them on Yamaha's Website within a reasonable period of time before the effective date.
- You may terminate this Agreement before the effective date in accordance with the way that Yamaha specifies if you don't agree with the amendment of this Agreement.
10. GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect. All legal notices, notice of disputes and demands for arbitration, and any other notice which purports to change these provisions or to assert legal entitlements must be sent in writing to:
Yamaha Corporation
10-1, Nakazawa-cho, Chuo-ku, Hamamatsu, Shizuoka, 430-8650, Japan
11. ENTIRE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement.
Last updated: July 10, 2024