ProVisionaire Design V1.3.0 for Win 11/10 and firmware
Notice Regarding Dante Brooklyn 3 Support
- MTX5-D/MRX7-D/XMV-D manufactured after early June 2023 are now using the Dante Brooklyn 3 module, provided by Audinate. Hardware that has been revised due to the parts change has an "A"(or subsequent letters of the alphabet) marked next to the model number on the serial number label, and the Dante module used in this product can be identified in the Dante Controller. For more information about the open-source licenses used for each Dante module, please visit the Audinate website at https://www.audinate.com/software-licensing
- For MTX5-D/MRX7-D/XMV-D, the Main firmware version V4.20 or later is compatible with Dante Brooklyn3. Also, XMV-D with Dante Brooklyn 3 cannot be downgraded to the Main firmware version V4.10 or earlier.
Important Notice
- Upgrading DME7 to V1.03 or later improves internal clock quality. The firmware update takes about 15 minutes. Do not turn off the unit until the update is complete.
This zip file includes the following software:
- ProVisionaire Design V1.3.0
- DME7 Firmware V1.20
* Dante firmware is automatically updated to V4.2.4.5-4.2.4.4-1.0.2 when updated. - MTX3 Firmware V4.21
- MTX5-D Firmware V4.21
- MRX7-D Firmware V4.21
- EXi8 Firmware V4.21
- EXo8 Firmware V4.21
- PGM1 Firmware V4.20
- MCP1 Firmware V5.01
- VXL1-16P Firmware V2.8.0
- VXC2P Firmware V2.8.1
- PC-D series Firmware V1.1.0
- XMV series Firmware V4.21
- RM-CG Firmware V2.8.0
* Dante firmware is automatically updated to V4.2.2.3-4.1.6.5-1.0.2 when Device Firmware is updated. - RM-TT Firmware V2.8.0
* Dante firmware is automatically updated to V4.2.2.3-4.1.6.5-1.0.2 when Device Firmware is updated. - MTX5-D Dante Firmware V4.2.5.3-4.2.0.28-5.0.1-5.0.2
- PGM1 Dante Firmware V4.0.9.1-4.0.8.4-1.0.4
- VXL1-16P Dante Firmware V4.2.2.3-4.1.6.5-1.0.2
- PC-D series Dante Firmware V4.2.7.1-4.0.4.8-1.1.1
- XMV series Dante Firmware 4.2.5.3-4.2.0.28-5.0.1-5.0.2
NOTES: The firmware for the R series, Tio1608-D/D2, is not included. Please update the firmware separately using the R-Remote.
NOTES: The firmware for DZR/DXS XLF is not included. Please update the firmware separately using the DZR-D/DXS XLF-D Firmware Updater.
NOTES: Please use the Dante Updater in Dante Controller when updating Dante firmware. Please refer to the Dante Firmware Update Guide for details.
NOTES: We recommend using the main firmware and the specified Dante firmware that are compatible with the Dante module installed on your device. Please refer to the following. (as of November 2024)
| main firmware up to V4.10 | main firmware V4.20 and higher | |
|---|---|---|
| recommended Dante firmware version | recommended Dante firmware version | |
| MTX5-D/MRX7-D/XMV-D
Model with Brooklyn3 |
NG | OK |
| V4.2.5.3-4.2.0.28-5.0.1-5.0.2 | ||
| MTX5-D/MRX7-D/XMV-D
Model with Brooklyn2 |
OK | OK |
| V4.2.4.1-4.0.5.2-3.1.0-2.0.5 | V4.2.5.3-4.2.0.28-5.0.1-5.0.2 |
Dante firmware V4.2.4.1-4.0.5.2-3.1.0-2.0.5 can be downloaded from the following URL.
https://asia-latinamerica-mea.yamaha.com/en/support/updates/mtx_mrx_edit_v401_firm_v410.html
Filename：FWUpdate_MRX7-D_v4020401_v4000502_sw310_fw205.dnt
ProVisionaire Design Compatibilities
Please make sure to use the appropriate versions of firmware and software, referring to the following compatibility charts. Using an unsupported combination may result in a malfunction.
Main Revisions and Enhancements
PC-D/DI V1.1.0
New functions
- It is now possible to select whether to mix or separate Control and Dante connections. Together with the “Secondary Port” setting, up to four types of network systems can be chosen.
- Speaker data for CHR15M and CHR12 has been added.
Improvements
- Changed the string "MASTER" to "LEADER".
MTX3/MTX5-D/MRX7-D V4.21
Fixed Bugs
- Fixed a problem that could prevent 3rd party devices from being controlled by the External Events function.
VXL1-16P V2.8.0
Fixed Bugs
- Fixed a problem that could cause the patch to disappear when the VXL1-16P is rebooted with the VXL1-16P patched with the AES67 standard.
DZR-D/DXS XLF-D V1.5.0/V1.5.1
New functions
- Network settings and presets can now be retained during initialization.
Improvements
- The name of “DELAY ALIGNMENT” on the UTILITY > DEVICE SETUP screen has been changed to “HW DELAY ALIGN.
ProVisionaire Design V1.3.0
New functions
- The following models are supported.
- VXC2P
- DZR Series
DZR315-D
DZR15-D
DZR12-D
DZR10-D - DXS-XLF Series
DXS18XLF-D
DXS15XLF-D
- The following Library has been added to the Speaker Processor component of the DME7/MRX7-D/MTX5-D/MTX3/PC series.
- CHR15M
- CHR12
- MCP1 supports the following models.
- VXC2P
Fixed Bugs
- The Sampling Rate Converter can now be edited in Properties when MY4-AEC or MY8-AE96S is selected in the Slot component of MRX7-D.
- Fixed some minor bugs.
System Requirements
| OS | Windows 11(64bit)/Windows 10(64bit) |
|---|---|
| CPU | Core i5 or better (Windows 11)/ Core i3 or better (Windows 10) |
| Memory | 8 GB or more |
| HDD | 2.1GB or more |
| Display | 1280 × 1024 (SXGA) or higher |
| Other | Ethernet (1000BASE-T or higher) |
Concorde com os termos para baixar o arquivo
ATTENTION
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("YAMAHA").
BY DOWNLOADING OR INSTALLING THIS SOFTWARE OR OTHERWISE RENDERING IT AVAILABLE FOR YOUR USE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE SOFTWARE.
GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use the programs and data files composing the software accompanying this Agreement, and any programs and files for upgrading such software that may be distributed to you in the future with terms and conditions attached (collectively, “SOFTWARE”), only on a computer, musical instrument or equipment item that you yourself own or manage. While ownership of the storage media in which the SOFTWARE is stored rests with you, the SOFTWARE itself is owned by Yamaha and/or Yamaha’s licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions.
RESTRICTIONS
- You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever.
- You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE.
- You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.
- You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
- You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe.
- Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
- Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner.
- The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner.
TERMINATION
If any copyright law or provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.
DOWNLOADED SOFTWARE
If you believe that the downloading process was faulty, you may contact Yamaha, and Yamaha shall permit you to re-download the SOFTWARE, provided that you first destroy any copies or partial copies of the SOFTWARE that you obtained through your previous download attempt. This permission to re-download shall not limit in any manner the disclaimer of warranty set forth in Section 5 below.
DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided "AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.
LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
THIRD PARTY SOFTWARE
Third party software and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. If, in the written materials or the electronic data accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof.
- Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
- Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
- Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.
U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein
GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.
COMPLETE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of Yamaha.