ProVisionaire Design V1.1.0 for Win 11/10 and firmware (Previous version)
Notice Regarding Dante Brooklyn 3 Support
- MTX5-D/MRX7-D/XMV-D manufactured after early June 2023 are now using the Dante Brooklyn 3 module, provided by Audinate. Hardware that has been revised due to the parts change has an "A"(or subsequent letters of the alphabet) marked next to the model number on the serial number label, and the Dante module used in this product can be identified in the Dante Controller. For more information about the open-source licenses used for each Dante module, please visit the Audinate website at https://www.audinate.com/software-licensing
- For MTX5-D/MRX7-D/XMV-D, the Main firmware version V4.20 or later is compatible with Dante Brooklyn3. Also, XMV-D with Dante Brooklyn 3 cannot be downgraded to the Main firmware version V4.10 or earlier.
Important Notice
- Upgrading DME7 to V1.03 or later improves internal clock quality. The firmware update takes about 15 minutes. Do not turn off the unit until the update is complete.
This zip file includes the following software.
- ProVisionaire Design V1.1.0
- DME7 Firmware V1.10 *
(*) Dante firmware is automatically updated to V4.2.4.5-4.2.4.4-1.0.2 when updated. - MTX3 Firmware V4.20
- MTX5-D Firmware V4.20
- MRX7-D Firmware V4.20
- EXi8 Firmware V4.20
- EXo8 Firmware V4.20
- PGM1 Firmware V4.20
- VXL1-16P Firmware V2.0.0
- PC-D series Firmware V1.0.6
- XMV series Firmware V4.20
- RM-CG Firmware V2.0.0
- RM-TT Firmware V2.0.0
- MTX5-D Dante Firmware V4.2.5.3-4.2.0.28-5.0.1-5.0.2
- PGM1 Dante Firmware V4.0.9.1-4.0.8.4-1.0.4
- VXL1-16P Dante Firmware V4.2.2.3-4.1.6.5-1.0.2
- PC-D series Dante Firmware V4.2.7.1-4.0.4.8-1.0.1
- XMV series Dante Firmware 4.2.5.3-4.2.0.28-5.0.1-5.0.2
- MCP1 Firmware V5.0
NOTES: The firmware for the R series, Tio1608-D/D2, is not included. Please update the firmware separately using R-Remote.
NOTES: Please use the Dante Updater in Dante Controller when updating Dante firmware. Please refer to the Dante Firmware Update Guide for details.
NOTES: We recommend using the Main and Dante firmware that is compatible with the Dante module installed in your product. Please refer to the following.
- For MTX5-D/MRX7-D/XMV-D with Brooklyn 3 Dante module:
- Main firmware: Please use V4.20.
- Dante firmware: Please use V4.2.5.3-4.2.0.28-5.0.1-5.0.2.
- For MTX5-D/XMV-D with Brooklyn 2 Dante module:
- Main firmware: Please use V4.10.
- Dante firmware: Please use V4.2.4.1-4.0.5.2-3.1.0-2.0.5. You can obtain the files from this link.
ProVisionaire Design Compatibilities
Please make sure to use the appropriate versions of firmware and software, referring to the following compatibility charts. Using an unsupported combination may result in a malfunction.
Main Revisions and Enhancements
[DME7 V1.10]
New Functions
- Scheduler function has been added.
- Scheduler status indication has been added to the Home screen.
- DDM (Dante Domain Manager) status indication has been added to the Home screen.
- Added the following audio components -
- Program Ducker
- De-Esser
- Ping Pong Delay
- The language used for the LCD front panel display can now be changed.
[MCP1 V5.0]
New Functions
- The following devices are now supported and can be directly controlled from MCP1 -
- MTX/MRX Series
- DME7
- EXi8/EXo8
- TF Series
- CL Series
- QL Series
- Tio Series
- Rio Series
- RM-CR/CG/TT
- DM3/S
- DM7/C
- DSP-R10/RX/RX-EX
- CSD-R7
- DZR Series
- DXS Series
[ProVisionaire Design V1.1.0]
New Functions
- Support for MRX7-D V4.20.
- Support for Tio1608-D2 V2.00 or later.
- Support for MCP1 V5.0.
- The following functions and audio components have been added for DME7.
- Scheduler function
- Daylight Saving Time function
- Program Ducker component
- De-Esser component
- Ping Pong Delay component
Improvements
- "Rectangle" graphic has been added.
- “Duplicate Port Label-to the right/left" is now available, to copy labels for multiple selected ports simultaneously.
- “Edit Port Label" has been added to the context menu of the DME7/MRX7-D component to allow batch port renaming.
- Matrix component window size can now be expanded.
Fixed Bug
- Fixed a problem with DME7 that prevented compilation when a 16 channel AEC component was used.
System Requirements
| OS | Windows 11(64bit)/Windows 10(64bit) |
|---|---|
| CPU | Core i5 or better (Windows 11)/ Core i3 or better (Windows 10) |
| Memory | 8 GB or more |
| HDD | 700 MB or more |
| Display | 1280 × 1024 (SXGA) or higher |
| Other | Ethernet（1000BASE-T or higher） |
Concorde com os termos para baixar o arquivo
ATTENTION
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("YAMAHA").
BY DOWNLOADING OR INSTALLING THIS SOFTWARE OR OTHERWISE RENDERING IT AVAILABLE FOR YOUR USE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE SOFTWARE.
GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use the programs and data files composing the software accompanying this Agreement, and any programs and files for upgrading such software that may be distributed to you in the future with terms and conditions attached (collectively, “SOFTWARE”), only on a computer, musical instrument or equipment item that you yourself own or manage. While ownership of the storage media in which the SOFTWARE is stored rests with you, the SOFTWARE itself is owned by Yamaha and/or Yamaha’s licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions.
RESTRICTIONS
- You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever.
- You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE.
- You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.
- You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
- You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe.
- Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
- Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner.
- The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner.
TERMINATION
If any copyright law or provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.
DOWNLOADED SOFTWARE
If you believe that the downloading process was faulty, you may contact Yamaha, and Yamaha shall permit you to re-download the SOFTWARE, provided that you first destroy any copies or partial copies of the SOFTWARE that you obtained through your previous download attempt. This permission to re-download shall not limit in any manner the disclaimer of warranty set forth in Section 5 below.
DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided "AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.
LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
THIRD PARTY SOFTWARE
Third party software and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. If, in the written materials or the electronic data accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof.
- Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
- Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
- Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.
U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein
GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.
COMPLETE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of Yamaha.