XMV Séries Caixas Amplificadas

XMV4280-D XMV4280 XMV4140-D XMV4140
Output power 1kHz (THD+N=1%: 4Ω) 280W x 4 280W x 4 140W x 4 140W x 4
1kHz (THD+N=1%: 8Ω) 280W x 4 280W x 4 140W x 4 140W x 4
1kHz (THD+N=1%: 4Ω / Double Power Mode) 560W x 2 560W x 2 280W x 2 280W x 2
1kHz (THD+N=1%: 8Ω / Double Power Mode) 560W x 2 560W x 2 280W x 2 280W x 2
High impedance: 100V line 250W x 4 / 40 Ω 250W x 4 / 40 Ω 125W x 4 / 80 Ω 125W x 4 / 80 Ω
High impedance: 70V line 250W x 4 / 20 Ω 250W x 4 / 20 Ω 125W x 4 / 40 Ω 125W x 4 / 40 Ω
Voltage Gain RL=8Ω 31.7dB 31.7dB 28.7dB 28.7dB
RL=8Ω / Double Power Mode 34.7dB 34.7dB 31.7dB 31.7dB
100V 38.2dB 38.2dB 38.2dB 38.2dB
70V 35.2dB 35.2dB 35.2dB 35.2dB
Total harmonic distortion ≤ 0.2% (1kHz, half power) ≤ 0.2% (1kHz, half power) ≤ 0.2% (1kHz, half power) ≤ 0.2% (1kHz, half power)
Frequency response 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz)
S/N ratio ≥ 100dB(A-weighted) ≥ 100dB(A-weighted) ≥ 100dB(A-weighted) ≥ 100dB(A-weighted)
Crosstalk ≤ -60dB ≤ -60dB ≤ -60dB ≤ -60dB
Input sensitivity +4dBu +4dBu +4dBu +4dBu
Input impedance 20kΩ (balanced), 10k Ω (unbalanced) 20kΩ (balanced), 10k Ω (unbalanced) 20kΩ (balanced), 10k Ω (unbalanced) 20kΩ (balanced), 10k Ω (unbalanced)
I/O Connectors Speaker Output Barrier strip x 4 pairs Barrier strip x 4 pairs Barrier strip x 4 pairs Barrier strip x 4 pairs
Control ports Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1
Network Shared with Dante ports RJ45 x 1 Shared with Dante ports RJ45 x 1
Input Level +24dBu (Maximum) +24dBu (Maximum) +24dBu (Maximum) +24dBu (Maximum)
Consumo de energia 1/8 power (4 Ω pink noise):250W, Idle (4 Ω):37W, Standby:18.5W 1/8 power (4 Ω pink noise):250W, Idle (4 Ω):37W, Standby:18.5W 1/8 power (4 Ω pink noise):150W, Idle (4 Ω):37W, Standby:18.5W 1/8 power (4 Ω pink noise):150W, Idle (4 Ω):37W, Standby:18.5W
Conectores de entrada/saída I/O Analógico Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced)
I/O digital RJ45 x 2 (Dante PRIMARY / SECONDARY) RJ45 x 2 (YDIF IN / OUT) RJ45 x 2 (Dante PRIMARY / SECONDARY) RJ45 x 2 (YDIF IN / OUT)
Apresentação da Série CP na Musikmesse Frankfurt 2010 (inglês) AC Inlet x 1 AC Inlet x 1 AC Inlet x 1 AC Inlet x 1
Circuito de proteção Proteção de carga POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Proteção da fonte de alimentação Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically)
Circuito de proteção Proteção do amplificador Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically)
Refrigeração 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow
Requisitos de potência 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz
Dimensões Largura 480mm (18.9") 480mm (18.9") 480mm (18.9") 480mm (18.9")
Altura 88mm (3.5") 88mm (3.5") 88mm (3.5") 88mm (3.5")
Profundidade 422mm (16.6") 422mm (16.6") 422mm (16.6") 422mm (16.6")
Peso líquido 8.1kg (17.9lbs) 8.1kg (17.9lbs) 8.1kg (17.9lbs) 8.1kg (17.9lbs)
XMV8280-D XMV8280 XMV8140-D XMV8140
Output power 1kHz (THD+N=1%: 4Ω) 280W x 8 280W x 8 140W x 8 140W x 8
1kHz (THD+N=1%: 8Ω) 280W x 8 280W x 8 140W x 8 140W x 8
1kHz (THD+N=1%: 4Ω / Double Power Mode) 560W x 4 560W x 4 280W x 4 280W x 4
1kHz (THD+N=1%: 8Ω / Double Power Mode) 560W x 4 560W x 4 280W x 4 280W x 4
High impedance: 100V line 250W x 8 / 40 Ω 250W x 8 / 40 Ω 125W x 8 / 80 Ω 125W x 8 / 80 Ω
High impedance: 70V line 250W x 8 / 40 Ω 250W x 8 / 40 Ω 125W x 8 / 40 Ω 125W x 8 / 40 Ω
Voltage Gain RL=8Ω 31.7dB 31.7dB 28.7dB 28.7dB
RL=8Ω / Double Power Mode 34.7dB 34.7dB 31.7dB 31.7dB
100V 38.2dB 38.2dB 38.2dB 38.2dB
70V 35.2dB 35.2dB 35.2dB 35.2dB
Total harmonic distortion ≤ 0.2% (1kHz, half power) ≤ 0.2% (1kHz, half power) ≤ 0.2% (1kHz, half power) ≤ 0.2% (1kHz, half power)
Frequency response 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz)
S/N ratio ≥ 100dB(A-weighted) ≥ 100dB(A-weighted) ≥ 100dB(A-weighted) ≥ 100dB(A-weighted)
Crosstalk ≤ -60dB ≤ -60dB ≤ -60dB ≤ -60dB
Input sensitivity +4dBu +4dBu +4dBu +4dBu
Input impedance 20kΩ (balanced), 10k Ω (unbalanced) 20kΩ (balanced), 10k Ω (unbalanced) 20kΩ (balanced), 10k Ω (unbalanced) 20kΩ (balanced), 10k Ω (unbalanced)
I/O Connectors Speaker Output Barrier strip x 8 pairs Barrier strip x 8 pairs Barrier strip x 8 pairs Barrier strip x 8 pairs
Control ports Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1
Network Shared with Dante ports RJ45 x 1 Shared with Dante ports RJ45 x 1
Input Level +24dBu (Maximum) +24dBu (Maximum) +24dBu (Maximum) +24dBu (Maximum)
Consumo de energia 1/8 power (4 Ω pink noise):450W, Idle (4 Ω):73W, Standby:23W 1/8 power (4 Ω pink noise):450W, Idle (4 Ω):73W, Standby:23W 1/8 power (4 Ω pink noise):250W, Idle (4 Ω):73W, Standby:23W 1/8 power (4 Ω pink noise):250W, Idle (4 Ω):73W, Standby:23W
Conectores de entrada/saída I/O Analógico Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced)
I/O digital RJ45 x 2 (Dante PRIMARY / SECONDARY) RJ45 x 2 (YDIF IN / OUT) RJ45 x 2 (Dante PRIMARY / SECONDARY) RJ45 x 2 (YDIF IN / OUT)
Apresentação da Série CP na Musikmesse Frankfurt 2010 (inglês) AC Inlet x 1 AC Inlet x 1 AC Inlet x 1 AC Inlet x 1
Circuito de proteção Proteção de carga POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Proteção da fonte de alimentação Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically)
Circuito de proteção Proteção do amplificador Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically)
Refrigeração 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow
Requisitos de potência 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz
Dimensões Largura 480mm (18.9") 480mm (18.9") 480mm (18.9") 480mm (18.9")
Altura 88mm (3.5") 88mm (3.5") 88mm (3.5") 88mm (3.5")
Profundidade 422mm (16.6") 422mm (16.6") 422mm (16.6") 422mm (16.6")
Peso líquido 10.1kg (22.3lbs) 10.1kg (22.3lbs) 10.1kg (22.3lbs) 10.1kg (22.3lbs)