MTX Séries

MTX5-D MTX3
Mixing capability Mixing channels Mixing Channel : 16 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix Mixing Channel : 8 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix/ Output Busses : 8 Mono
Input channel functions Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (available in ch 1-8) Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (only available in ch 1-4)/ Stereo CH: 3-band PEQ, Comp, Auto Gain Control
Output channel functions Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter
I/O Phantom power +48V +48V
Internal processing Priority Ducking, Ambient Noise Compensator Priority Ducking, Ambient Noise Compensator
Signal delay Less than 3.0ms (AD-DA @48kHz) Less than 2.5ms (AD-DA @48kHz)
Total harmonic distortion Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB) Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB)
Frequency response 20Hz to 20kHz, +0.5dB, -1.5dB 20Hz to 20kHz, +0.5dB, -1.5dB
Dynamic range 107dB (Gain:-6dB) 107dB (Gain:-6dB)
Hum & noise level Equivalent input noise -60dBu (Gain:+66dB), -83dBu (Gain:-6dB) -60dBu (Gain:+66dB), -83dBu (Gain:-6dB)
Crosstalk -100dB -100dB
Heat dissipation 55.9kcal/h max 43kcal/h max
Taxa de amostragem Interno 48kHz/ 44.1kHz 48kHz/44.1kHz
Requisitos de potência AC100V-240V 50Hz/60Hz AC100V-240V 50Hz/60Hz
Consumo de energia 65W 50W
Dimensões Largura 480mm (18.9") 480mm (18.9")
Altura 88mm (3.4") 44mm (1.7")
Profundidade 351mm (13.9") 362mm (14.3")
Peso líquido 6.3kg (13.9lbs) 4.8kg (10.6lbs)
Apresentação da Série CP na Musikmesse Frankfurt 2010 (inglês) Memory bank : PRESET 50 Memory bank : PRESET 50
  • * Total harmonic distortion is measured with a 18dB/Oct fi lter @80kHz.
  • * Hum & noise level is measured with a 6dB/oct fi lter @12.7kHz; equivalent to 20kHz fi lter with infi nite dB/Oct attenuation.

Analog Input Specifications

Input terminal GAIN Actual load
impedance
For use with
nominal
Input Level Connector
Nominal Max. before clip
INPUT 1-8 +66dB 10kΩ 50-600Ω Mics
& 600Ω Lines
-62dBu -42dBu Euroblock
-6dB +10dBu +30dBu
ST IN 1,2 - 10kΩ 600Ω Lines -10dBV +10dBV RCA Pin Jack

Analog Output Specifications

Output terminal Actual Source
impedance
For use with
nominal
Output Level Connector
Nominal Max. before clip
OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock

Digital Input and Output Specifications

Terminal Format Level IN/OUT Connector Note
YDIF In YDIF RS-422 16IN RJ45  
YDIF Out YDIF RS-422 16OUT RJ45  
Primary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only
Secondary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only

Control I/O Specifications

Terminal Level Connector
MTX3 GPI 8IN / 4OUT IN 1-7ch: 0V-5V
8ch: 2.5-24V : High, 2.5V or less, Allowable input +24V
Euroblock
OUT Open Collector
+V DC5V
Network   100Base-TX RJ-45
MTX5-D GPI 16 IN/ 8 OUT IN 1-15ch : 0-5V
16ch : 2.5-24V : High, 2.5V or less, Allowable input +24V
Euroblock
OUT Open Collector
+V DC5V
MTX3 & MTX5-D REMOTE   RS-232C (BAUD RATE : 38.4kbps or 115.2kbps) D-sub 9pin (Male)
DCP   - RJ-45
  EXi8 EXo8
Sampling frequency 48kHz/44.1kH
Signal delay Less than 2.5ms
Total harmonic distortion Less than 0.05% (+4dBu , Gain:-6dB); less than 0.1% (+4dBu , Gain:+66dB)
Frequency response 20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max
Dynamic range 107dB (Gain:-6dB)
Equivalent input noise (EIN) -126dBu (Gain: +66dB)
Phantom power +48V (per channel; individually settable)
Crosstalk -100dB (@1kHz)
Heat dissipation (per hour) 21.5 kcal max.
Power supply voltage 100V 50/60Hz
Power consumption 25 W max.
Dimensions (W x H x D) 480(W) x 44(H) x 351(D)mm, 1U 480(W) x 44(H) x 351(D)mm, 1U
Included items Power cord, Euroblock plugs (3-pin, tabbed) x8

EXi8 Analog Input Specifications

Input terminal GAIN Actual load
impedance
For use with
nominal
Input Level Connector
Nominal Max. before clip
INPUT 1-8 +66dB 10kΩ 50-600Ω Mics
& 600Ω Lines
-62dBu -42dBu Euroblock
-6dB +10dBu +30dBu

EXi8 Digital Input Specifications

Terminal Format Level IN/OUT Connector
YDIF In YDIF RS-422 16IN RJ45

EXo8 Analog Output Specifications

Output terminal Actual Source
impedance
For use with
nominal
Output Level Connector
Nominal Max. before clip
OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock

EXo8 Digital Output Specifications

Terminal Format Level IN/OUT Connector
YDIF Out YDIF RS-422 16OUT RJ45

Exi8 / Exo8 Control I/O Specifications

Terminal Format Level Connector
Network  Ethernet 100Base-TX - RJ-45